Yesterday, we had another cleaning job to do… the fans, which we wanted to use inside the chassis and on the radiators, had already been in use in a different project. As a result, they were very dusty. And with some, the label in the middle was beginning to peel off.

Here is our complete stack of red Phobya NB-eLoop fans:

The great thing about the NB e-loops is that the rotor blade and the rubber buffers in the corners can be removed easily.

Therefore, we could clean the parts easily with a brush, compressed air and dishwashing liquid. After that, we applied a drop of oil on the axis, so they would run smoothly again…

We peeled off the labels in the middle very carefully and used some simple UHU to glue them back on.

Now, all fans are ready to be used in our current project.

All post for Project Mäcki

Project Mäcki von hitzestau
Project Mäcki: First pictures of our Heatkiller Tube
Project Mäcki: Working on the metal plate for the aquareo
Project Mäcki: A brief update
Project Mäcki: Installation of new CPU waterblock
Project Mäcki: Photoshooting with the new CPU waterblock
Project Mäcki: Cleaning the GPU-waterblock
Project Mäcki: We are waiting…
Project Mäcki: …we can continue
Project Mäcki: Installation of the WLAN card
Project Mäcki: Cleaning the fans
Project Mäcki: New litz wire for the DDC pump
Project Mäcki: Installation of the front radiator
Project Mäcki: SSD and Cabling
Project Mäcki: Tubing and Filling
Project Mäcki: Pictures of the complete system


Einen Kommentar schreiben

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert.